The PA-14 pro wire strippers from Engineer Inc. (Japan) are extremely high quality & designed to remove insulation from super thin diameter wires swiftly, neatly & without deformation.
Please note: We sell several PRO wire strippers & there is a degree of overlap between them, so it essentially comes down to the thickness/size of the wire you'll find yourself stripping most. Here's a summary...
The PA-14 is for extra thin wire (stranded AWG34->AWG22 & solid core AWG32->AWG20)
The PA-06 is for thin wire (stranded AWG30->AWG18 & solid core AWG28->AWG16)
The PA-07 is for thicker wire (stranded AWG24->AWG12 & solid core AWG22->AWG10)
The PA-05 is also a wire stripper (stranded AWG30->AWG18 & Solid core AWG28->AWG16) but also comes with integral crimping dies to allow crimping of some of the Molex, JST etc mini crimp connector types.
Separate PA-90 depth / stop gauge attachment available to allow precise & repetitive stripping to a depth of just 1mm depth! (see foot of this page)
If you prefer to buy this item via Ebay, then please click the following link to see this item in our Ebay shop (though please note - our price needs to be a little higher on Ebay to cover their commission) - http://stores.ebay.co.uk/PrecisionHandTools/_i.html?_nkw=pa-14+pro&_sid=141857257
The strippers shown below are fitted with the optional PA-90 depth stop gauge (PA-90 must be purchased separately) ....once fitted the minimum repetitive strip depth can be as low as 1mm!!
To purchase the PA-90 wire stripper depth stop gauge available please click here - http://www.precisionhandtools.co.uk/wire-pliers/Engineer-PA-90-wire-stripper-depth-stop-gauge)