Shipping Estimate
Applies to this product only
Country:
Region / State:
Post Code:
Google Translate

wire stripper & crimping combi tool

wire stripper & crimping combi tool
wire stripper & crimping combi tool
Brand: Engineer
Product Code: pa-05
Availability: In Stock
Price: £34.99
Qty:        

The PA-05 pro wire strippers from Engineer Inc. (Japan) come with with integral crimping dies to allow crimping of many mini crimp connector types. The stripper is extremely high quality & designed to remove insulation from thin diameter wires (vs the PA-07) swiftly, neatly & without deformation.

Please note: We sell several PRO wire strippers & there is a degree of overlap between them, so it essentially comes down to the thickness/size of the wire you'll find yourself stripping most. Here's a summary...

The PA-14 is for extra thin wire (stranded AWG34->AWG22 &  solid core AWG32->AWG20)

The PA-06 is for thin wire (stranded AWG30->AWG18 &  solid core AWG28->AWG16)

The PA-07 is for thicker wire (stranded AWG24->AWG12 &  solid core AWG22->AWG10)

The PA-05 here is also a wire stripper (stranded AWG30->AWG18  & Solid core  AWG28->AWG16) but also comes with integral crimping dies to allow crimping of some of the Molex, JST etc mini crimp connector types. 

 

  • Has integral crimping dies which can crimp some mini crimps from Molex, JST Amp etc.
  • Strips both solid & stranded wires (stranded AWG30->AWG18 &  solid core AWG28->AWG16)
  • No damage or deformation to the core conductor wire when stripping insulation (unlike many auto type strippers)
  • Extremely neat finish to stripped insulation (i.e. very sharp & precise carbon steel jaws)
  • Oil-resistant Elastomer (TPR) handle grips (a delight to hold & use) 
  • Spring loaded for easy operation and latches shut for storage.
  • Set-pin prevents the Strippers from Loosening and Allows for Easy Maintenance
  • Made from S55C Carbon Steel in Japan

       Separate PA-90 depth / stop gauge attachment available to allow precise & repetitive stripping to a depth of just 1mm depth! (see foot of this page)

 

If you prefer to buy this item via Ebay, then please click the following link to see this item in our Ebay shop (though please note - our price needs to be a little higher on Ebay to cover their commission) http://stores.ebay.co.uk/PrecisionHandTools/_i.html?_nkw=pa-05+crimping&_sid=141857257

 

 
with strap hole
 
■ CRIMPING FUNCTION
Bare Terminal Connector Terminal
0.5 to 2.0 mm2 0.3 to 1.25 mm2
.............................................................................................................................................................................................................................................................................................................
■ SPECIFICATIONS

Model

Weight

PA-05

166 g

 

APPLICATION SIZE CHART

 

Stripper's Hole Diameter

0.4 0.5 0.65 0.8 0.95 1.15

1.45

Applicable
Wire
External Diameter (mm) 0.3 0.38 0.5 0.64 0.8 1.0

1.3

Sectional Area (mm2) 0.05 0.08 0.13 0.2 0.33 0.52

0.82

A W G
Conversion
Stranded 30 28 26 24 22 20 18
Solid Wire 28 26 24 22 20 18 16

 

 

 

 

The strippers shown below are fitted with the optional PA-90 depth stop gauge (PA-90 must be purchased separately)   ....once fitted the minimum repetitive strip depth can be as low as 1mm!!

To purchase the PA-90 wire stripper depth stop gauge available please click here - http://www.precisionhandtools.co.uk/wire-pliers/Engineer-PA-90-wire-stripper-depth-stop-gauge

 

 

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



PreciseHandTools.com is an Upfront Merchant on TheFind. Click for info.
Powered By OpenCart and OC2PS
PreciseHandTools.com © 2017